Product Characteristics

• Simple structure and reliable sealing

  It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing.

• No water passes the valve in regeneration in single tank type

• Manual function

  Realize regeneration immediately by pressing “Manual/Return” at any time.

• Reserved pressure gauge connector

  There is a pressure gauge connector reserved at the water inlet, drill and fit on the pressure gauge when you need.

• Long outage indicator

  If outage overrides 3 days, the time of day indicator “12:12” will flash to remind people to reset new time of day. The other set parameters do not need to reset. The process will continue to work after power on.

• LED dynamic screen display

  The stripe on dynamic screen flash, it indicates the control valve is in service, otherwise, it is in regeneration cycle.

• Buttons lock

  No operations to buttons within 1 minute, button lock indicator lights on which represents buttons are locked. Before operation, press and hold the “Up” and “Down” buttons for 5 seconds to unlock. This function can avoid incorrect operation.

• It can choose valve model by program selection

  When all symbols light on, press and hold Menu/Confirm and Manual/Return buttons more than 2 seconds to enter the menu of valve model selection. Press “Up” or “Down” buttons to select the requested model, then press Menu/Confirm button to save the selection. Reconnect the power, the model will be showed on screen.

• Interlock function

It has a function of interlock to realize only one valve in regeneration but the other valves are in service while several valves parallel in system. In multi-steps treatment systems such as RO pre-treatment, when several valves are in series, there is only one valve in regeneration or washing to ensure pass water all the times while different valves in regeneration or washing.