Product Characteristics

• Simple Structure and High Integration

  The core part of product is made of the high degree pottery. It combines with Empty A (Monitoring waiting), Washing A, Empty B, Reagent Entering, Water Sample Entering, Testing, and Washing B. Realize automatic wash, automatic reagent refill, automatic water sample enter, automatic water mixing, automatic testing and automatic signal output.

• Accurately Sampling

  Feeding in reagent through the high-precision through-holes in the regent bottle and sampling in the mixing cavity makes the measurement more accurate.

• High Degree of Automation

  The whole process is controlled by the micro-computer; each working status and working time is showed in the LCD display board.

• Press “Manual/Return”to realize the forced monitoring

• There are two kinds of working mode： A-01 and A-02

  A-01 mode: the monitoring waiting time is directly set by users.

  A-02 mode: by inputting the resin volume, water hardness, average water consumption per hour, the monitoring waiting time will be automatically calculated by the device. It is good for saving reagent by making the time short during the cycle of producing water and making the time long during the regeneration time.

• Reasonable, Economic and Effective

  The device will control the softener valve start regeneration when the water hardness of outlet water exceed standards; the device will be in the waiting conditions when none of the water come from the outlet, so as to save the reagent, making the whole system operate more reasonably, economically and effectively.

• Less Maintenance

  A bottle of reagent can be used for about three months.

• Intelligent Protection

  1. After power off, the device will be in Empty A conditions (monitoring waiting), avoiding the wrong alarm.

  2. After starting monitoring, in any status, if the device finds there is no water for more than 5 seconds, the device will not tell the testing result, which means the display board will not show “This testing is qualified or unqualified” after monitoring is over.

  3. During the monitoring period, if the device is out of reagent, it will not tell the testing result. And the display board will show “Reagent lack”, reminding users to replace the reagent. If the reagent can’t be replaced in time, the device will forcibly let the softener valve start regeneration after 10 hours.

  4. When monitoring times reached 750, the buzzer and the screen will remind “Replace Reagent”. When monitoring times reached 801, monitoring stops, screen shows “Reagent Lack”. After changing the reagent, press “Down” for 5 seconds under monitoring waiting condition(Keyboard unlock), the screen will be cleared and times will be zero after hearing “DI” sound.

• Remote Handling Output

  When the outlet water fails to meet the requirements, the device will send the signal to the softener valve and make the valve start regeneration forcibly, so as to make sure the outlet water is qualified.